Matrox PJ-4OLP Guia do Utilizador descarregar pdf (Página 11)

Matrox MED Series – User Guide 11

MED5mp connection setup

The following describes how to connect grayscale

monitors to a Matrox MED5mp card. This card is

designed for grayscale monitors with BNC (Bayonet

Neill-Concelman) connectors.

1 Connect the first monitor

Connect one of the monitor cables included

with your Matrox product to the main

connector (

) on your Matrox card.

Connect the BNC connectors on your

monitor cable to your preferred monitor.

2 Connect the second monitor

Connect your other monitor cable to the

secondary connector (

) on your Matrox

card.

Connect the BNC connectors on your

monitor cable to your second monitor.

WA R N I N G :

Depending on your Matrox product, the output signal is configured to use 50

or 75 ohms. Before connecting a monitor to your Matrox card, make sure they’re

compatible. Otherwise,

some

monitors may be permanently damaged. For more

information, see your monitor documentation.

Monitor cable

(included)

Note:

When connecting the BNC

connectors on your monitor cable to your

monitors, make sure the Green (

Horizontal Sync (

– gray wire), and

Ver t i cal Sync (

– black wire) connections

are firmly in place and plugged into the

correct input.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

Sem comentários

Matrox PJ-4OLP Guia do Utilizador Página 11