Matrox PJ-4OLP Guia do Utilizador descarregar pdf (Página 5)

Matrox MED Series – User Guide 5

Hardware installation

This section describes how to install your Matrox card. If your Matrox card is already installed in your

computer, skip to “Connection setup”, page 8. For information specific to your computer, like how to

remove its cover, see your system manual.

1 Open your computer and

remove your existing graphics

card

Using

Add/Remove Programs

in the

Windows

Control Panel

, remove any

currently installed display drivers.

Restart your computer for the changes

to take effect.

After your computer restarts, you’re

prompted to install drivers for the new

graphics hardware detected. Click

Cancel

Turn off your computer and all

peripherals such as your monitor or printer.

Open the computer and remove your existing graphics card. (If graphics hardware is

built into the motherboard of your computer, this graphics hardware should

automatically disable itself after your Matrox card is installed. For more information, see

your system manual.)

WA R N I N G :

To avoid personal injury, turn off your computer, unplug it, and then wait for

it to cool before you touch any of its internal parts. Also, static electricity can severely

damage electronic parts. Before touching any electronic parts, drain static electricity from

your body (for example, by touching the metal frame of your computer). When handling

a card, carefully hold it by its edges and avoid touching its circuitry.

* With multi-display mode, you may be able to use your existing graphics card. For more information, see Windows online help

under “Multiple Display Support”.

1 2 3 4 5 6 7 8 9 10 ... 49 50

Sem comentários

Matrox PJ-4OLP Guia do Utilizador Página 5